Martin McClure: Starting the Survey, July 30, 2023

NOAA Teacher at Sea

Martin McClure

NOAA Ship Oregon II

July 25– August 9, 2023

Mission: Shark/Red Snapper Bottom Longline Survey

Geographic Area of Cruise: Gulf of Mexico/Atlantic Ocean

Date: July 30, 2023

Latitude: 31°21.967’N

Lonfitude: 80°12.135’W

Air Temperature: 27.5° C.

Wind Speed: 6.79 kph

Science and Technology Log: Longline Fishing

Teacher at Sea Stephen Kade created this graphic to help explain longline fishing.

We have started the longline survey and it is well organized and exciting. The first part of the process is called the set. We start the fishing process by baiting circle hooks. These hooks are attached to a 12 foot length of 3 mm line called a gangion (gan-jin). We use mackerel for bait. Each piece of fish is hooked through a circle hook.

Circle hooks ready for baiting

Next we drop over a buoy with a radar reflector on top called a hi flier. Attached to this is a 4 mm line called the main line. Then a weight is attached to the line and dropped. This anchors the beginning of the fishing line to the seafloor. Next, a numbered clip is attached to each gangion. The gangions are attached to the main line in order from 1- 50. A second weight is then attached to the main line and the process is repeated with gangions numbered 51- 100. A third weight is then attached to anchor this end of the line to the seafloor.

Tagging and attaching the gangions

Finally, a second hi flier buoy is attached and released to mark the end of the line.  As each of these steps is done a member of the team records it on a computer. This gives a precise time that each baited hook went in the water as well as when and where the anchors and buoys were released. 

Ready to drop the hi flyer

The next step is to take water measurements. This is done with a remarkable device called a CTD. CTD stands for conductivity, temperature and depth. Conductivity is related to how much salt is in the water (salinity) and is related to how well it will conduct electricity. It also measures the temperature and depth of the ocean at that spot. We attach a camera to it to see what the seafloor is made of at that spot. We want to know if it is a sandy bottom, sea grass, muddy, etc.  

The CTD


Then we wait one hour. 


The second part of the process is called the haul. The haul is simply the set done in reverse, except that we often catch fish. The fishermen use a grappling hook to retrieve the main line attached to the hi flier.

Grappling hook ready to thrown

When it is brought on board, the main line is attached to a winch. The winch is used to pull the main line up of the seafloor. As the main line is pulled in the gangions are detached and replaced in a barrel, the numbered clips are detached and kept on a line in number order. That way,  everything is ready to be used for the next set. Whatever is on, or not on, the hook is recorded on the computer. If the bait is missing or damaged is noted.

Weighing a barracuda

Any fish caught is noted on the computer and the team jumps into action. For sharks there are several things that happen. They are identified by species. The hook is removed and the shark is weighed. It is then measured for three different lengths, precaudal (before the tail fin), fork (at the fork in the tail, and total (the end of the tail fin). The sex, male or female,  and maturity is determined. Tissue samples are taken by cutting off a small piece of a fin. This tissue sample is placed in a small plastic vial and labeled. They are also often given a numbered tag. This information is all recorded and entered into the computer. 

Me, tagging a sandbar shark.

Meet the Crew: Lieutenant James Freed

NOAA Corps Lieutenant James Freed is the operations officer for the Oregon II. He has many responsibilities as part of his job. Part of his job is to liaison, or maintain communication, between the science party and the ship’s commanding officer (CO). That means making sure that everything that the science team needs is on the ship. If the science team has needs then we would go through him and not directly to the CO. As Operations Officer he is also in charge of organizing materials when they come aboard the ship. He posts the Plan of the Day which lets everyone on board know what to expect that day. Lieutenant Freed coordinates port logistics for the ship. This means he coordinates the loading and unloading of materials. His duties also include acting as Officer of the Deck (OOD). During this 4 hour shift he is responsible for the ship’s navigation and safety. His emergency response assignments on the Oregon II include being the nozzleman on the fire team, launching life rafts for abandon ship and he goes out on the rescue boat for man overboard. 
Lieutenant Freed grew up in Santa Rosa, California. He attended Santa Rosa Junior College and then transferred to University of California, Santa Cruz where he studied marine biology. During this time he worked as an intern on a fishing vessel and this is where he first heard about the NOAA Corps. He has now been in the NOAA Corps for 6 years. Before being assigned to the Oregon II he was first assigned to the NOAA Ship Bell M. Shimada in Newport, Oregon. He then moved to Seattle working with the Marine Mammal Laboratory at Alaska Fisheries Science Center. For this assignment his duties were quite varied. They included doing a lot of field work, flying drones, and doing whale biopsies. 
Lieutenant Freed is clearly enthusiastic about his career in the NOAA Corps. He describes it as an “incredible career” that supports his growth with leadership and management training. The NOAA Corps is growing with new ships and aircraft and will need to recruit new members.. The ships participate in a wide variety of tasks including fisheries research, oceanographic and atmospheric data collection and hydrographic mapping. 

Personal Log

Well these last few days have been quite a transition. After 2 1/2 days of transit from Pascagoula, MS to Miami. It was a bit shocking to see how the skyline has changed after 40+ years. It has grown, to say the least. We started fishing just north of Miami. The 10 person science team is split into two shifts. I am on the “day” shift. We work from noon to midnight. These long shifts are filled with alternating periods of activity and waiting. After the set we wait for an hour before the haul. Then, depending on where the next set is, there will be another wait of between two to three hours. The hauls seem to follow the same patterns. As the mile of line is reeled in, there are long periods with not much happening. Then, there might be three fish online within a few hooks. Last night it was two baby tiger sharks and a 1200 mm (3 ft. 11 in.) barracuda within about 5 minutes. When there is a shark too big to haul up by hand on the gangion, the crane is used. We all don hardhats, the crane is moved into place and everyone is busy taking measurements, preparing tags, and taking tissue samples. I was warned to bring a lot of reading material for the down time and I did that. However, with so many things to learn, interesting people to talk to, and beautiful scenery to watch, I have had little time for boredom to creep in.

Ready to release a baby tiger shark.

One of the most common questions that I had before I left concerned getting motion sick. Dare I utter the word… seasick. So far, I have been lucky… hmm, I can’t seem to find any wood around here to knock on. I started the voyage with what I consider to be a rational decision, take the Dramamine. We started with two days of beautiful weather. By the first sign of rough seas I had stopped taking the Dramamine so I went outside and watched the horizon for about an hour. I decided that watching the horizon on a beautiful day at sea had no drawbacks. I never did feel nauseaus. Some people recomended that I buy the accupressure bands which I did. When seas get rough and I am inside I will sometimes wear those. I have not been seasick, yet. I still take precautions like not doing computer work inside when in rough seas but so far I have been fine. In fact, as far as I know none of the volunteers or crew have been sick.

I cannot end this blog without acknowledging the stewards in the gally and the impressive menu available at each meal. I think that there are always three choices for a main dish and a variety of sides. Additonally, a salad bar is always available, snacks, and my favorite, ice cream.

Just one of three delicious options that night

Animals seen: sea turtle, dolphin, snake fish, spotted eel, barracuda, shark sucker. Sharks: sandbar shark, tiger shark, Atlantic sharpnose shark, scalloped hammerhead

shame faced crab

Did you know?

Most of the fish that we catch have parasites living in and on them?

Anne Krauss: Tooth Truth and Tempests, September 30, 2018

NOAA Teacher at Sea

Anne Krauss

Aboard NOAA Ship Oregon II

August 12 – August 25, 2018

 

Mission: Shark/Red Snapper Longline Survey

Geographic Area of Cruise: Western North Atlantic Ocean/Gulf of Mexico

Date: September 30, 2018

Weather Data from Home

Conditions at 1515

Latitude: 43° 09’ N

Longitude: 77° 36’ W

Barometric Pressure: 1026.3 mbar

Air Temperature: 14° C

Wind Speed: S 10 km/h

Humidity: 71%

 

Science and Technology Log

My students sent me off with many shark questions before I left for the Shark/Red Snapper Longline Survey. Much of their curiosity revolved around one of the most fear-inducing features of a shark: their teeth! Students wanted to know:

Why do sharks eat fish?
How and why do sharks have so many teeth?
Why do sharks have different kinds of teeth?
Do sharks eat each other? What hunts sharks, besides other sharks?
And one of my favorite student questions: Why do sharks eat regular people, but not scientists?

Most people think of sharks as stalking, stealthy, steel-grey hunters. With a variety of colors, patterns, fin shapes, and body designs, sharks do not look the same. They do not eat the same things, or even get their food the same way. Instead, they employ a variety of feeding strategies. Some gentle giants, like the whale shark (Rhincodon typus), are filter feeders. They strain tiny plants and animals, as well as small fish, from the water. Others, such as the angel shark (Squatina spp.), rely on their flattened bodies, camouflage, and the lightning-fast element of surprise. Instead of actively pursuing their prey, they wait for food to come to them and ambush their meal. These suction-feeding sharks have tiny, pointed, rearward-facing teeth to trap the prey that has been sucked into the shark’s mouth. This video demonstrates how the angel shark uses clever camouflaging and special adaptations to get a meal:

https://www.nationalgeographic.com.au/videos/shark-kill-zone/angel-shark-stealth-2838.aspx

A circle hook is held up against the sky. The horizon is in the background.
Circle hooks are used in longline fishing. Each hook is baited with mackerel (Scomber scombrus).

A pile of frozen mackerel used as bait.
Frozen mackerel (Scomber scombrus) is used as bait.

Circle hooks are placed along the edges of plastic barrels. The hooks are connected to thick, plastic fishing line called monofilament.
The circle hooks and gangions are stored in barrels. The hooks are attached to thick, plastic fishing line called monofilament.

100 circle hooks baited with mackerel. The baited hooks are placed on the edges of barrels, which are sitting on deck.
All 100 circle hooks were baited with mackerel, but sharks also eat a variety of other fish.

The sharks we caught through longline fishing methods were attracted to the Atlantic mackerel (Scomber scombrus) that we used as bait. Depending on the species of shark and its diet, shark teeth can come in dozens of different shapes and sizes. Instead of just two sets of teeth like we have, a shark has many rows of teeth. Each series is known as a tooth file. As its teeth fall out, the shark will continually grow and replace teeth throughout its lifetime—a “conveyor belt” of new teeth. Some sharks have 5 rows of teeth, while the bull shark (Carcharhinus leucas) may have as many as 50 rows of teeth!

The sandbar shark (Carcharhinus plumbeus) usually has about 14 rows of teeth. They may lose teeth every ten days or so, and most sharks typically lose at least one tooth a week. Why? Their teeth may get stuck in their prey, which can be tough and bony. When you don’t have hands, and need to explore the world with your mouth, it’s easy to lose or break a tooth now and then. Throughout its lifetime, a shark may go through over 30,000 teeth. The shark tooth fairy must be very busy!

A sandbar shark (Carcharhinus plumbeus) tooth with serrated edges.
Sandbar shark (Carcharhinus plumbeus) tooth. The sandbar shark is distinguishable by its tall, triangular first dorsal fin. Sharks’ teeth are equally as hard as human teeth, but they are not attached to the gums by a root, like human teeth. Image credit: Apex Predators Program, NEFSC/NOAA

Similar to our dining utensils, sharks’ teeth are designed for cutting, spearing, and/or crushing. The tooth shape depends upon the shark’s diet. Sharks’ teeth are not uniform (exactly the same), so the size and shape of the teeth vary, depending on their location in the upper and lower jaws. Some sharks have long, angled, and pointed teeth for piercing and spearing their food. Similar to a fork, this ensures that their slippery meals don’t escape. Other sharks and rays have strong, flattened teeth for crushing the hard shells of their prey. These teeth work like a nutcracker or shellfish-cracking tool. Still others, like the famously fierce-looking teeth of the great white, are triangular and serrated. Like a steak knife, these teeth are used for tearing, sawing, and cutting into their prey.

A shortfin mako shark (Isurus oxyrinchus) tooth is narrow and pointed.
A shortfin mako shark (Isurus oxyrinchus) tooth is narrow and pointed. Image credit: Apex Predators Program, NEFSC/NOAA

Smooth dogfish (Mustelus canis) teeth are flattened for crushing prey.
Smooth dogfish (Mustelus canis) teeth are flattened for crushing prey. Image credit: Apex Predators Program, NEFSC/NOAA

A silky shark (Carcharhinus falciformis) tooth has serrated edges.
A silky shark (Carcharhinus falciformis) tooth has serrated edges. Image credit: Apex Predators Program, NEFSC/NOAA

A tiger shark (Galeocerdo cuvier) tooth is jagged and serrated.
A tiger shark (Galeocerdo cuvier) tooth is jagged and serrated. Image credit: Apex Predators Program, NEFSC/NOAA

Link to more shark tooth images: https://www.nefsc.noaa.gov/rcb/photogallery/shark_teeth.html

Beyond their teeth, other body features contribute to a shark’s ability to bite, crush, pursue, or ambush their prey. The powerful muscles that control their jaws and swimming ability, the position of their mouth, and the shape of their caudal (tail) fin all influence how a shark gets its food. Unlike humans, sharks do not chew their food. They swallow their food whole, or use their teeth to rip, shred, crush, and tear their food into smaller chunks that the shark can swallow. No need to floss or brush after a meal: sharks’ teeth contain fluoride, which helps to prevent cavities and decay.

Some people may find it hard to swallow the idea that sharks aren’t mindless menaces, but shark encounters are quite rare. Sharks have many extraordinary adaptations that make them efficient swimmers and hunters of other marine life, not humans. Whenever sharks come up in conversation, I am careful to dispel myths about these captivating creatures, trying to replace fear with facts (and hopefully, curiosity and respect). Since sharks can’t talk, I’m happy to advocate for them. Despite the way sharks are negatively portrayed in the media, I assure my students that sharks far prefer to eat bony fish, smaller sharks, skates, rays, octopus, squid, bivalves, crustaceans, marine mammals, plankton, and other marine life over humans. Instead of fear, I try to instill awareness of the vital role sharks fulfill in the ecosystem. We are a far greater threat to them, and they require our respect and protection.

For more information on sharks: https://oceanservice.noaa.gov/facts/sharkseat.html

 

Personal Log

As storms and hurricanes tear across the Gulf of Mexico, causing destruction and devastation, my thoughts are with the impacted areas. Before my Teacher at Sea placement, I never thought I’d spend time in the region, so it’s interesting to see now-familiar locations on the news and weather maps. One of my favorite aspects of being at sea was watching the sky: recognizing constellations while fishing at night, gazing at glorious, melting sunsets, and observing storm clouds gathering in the distance. The colors and clouds were ever-changing, a reminder of the dynamic power of nature.

A colorful sunset on the Gulf of Mexico.
The sky was vibrant.

Storm clouds gather over Tampa, Florida.
Storm clouds gathered over Tampa, Florida.

Darkening clouds over the water.
The clouds clustered around Tampa. The city looked very small on the horizon.

Darkening clouds over the water.
As the rain started, the clouds darkened.

Darkening clouds over the water.
The colors changed and darkened as lightning started in the distance.

Darkening clouds over the water.
Dramatic dark clouds and lightning.

Watching the recent storm coverage on TV reinforced the importance of strong and accurate communication skills. Similar to a sidebar on the page, much of the supplementary storm information was printed on the screen. For someone who needed to evacuate quickly or was worried about loved ones in the area, this printed information could be crucial. As I listened to the reporters’ updates on the storm damage, aware that they were most likely reading from scripted notes, I was reminded of the challenge of conveying complex science through everyday language.

Two maps show the Gulf of Mexico.
The top image from Google Maps shows one research station where we were longline fishing in August (marked in red). The bottom satellite image shows Hurricane Michael moving through the same area. Image credits: Map of the Gulf of Mexico. Google Maps, 17 August 2018, maps.google.com; satellite image: NOAA via Associated Press.

One might assume that a typical day at sea only focused on science, technology, and math. In fact, all school subjects surfaced at some point in my experience at sea. For example, an understanding of geography helped me to understand where we were sailing and how our location influenced the type of wildlife we were seeing. People who were more familiar with the Gulf of Mexico shared some facts about the cultural, economic, and historical significance of certain locations, shedding light on our relationship with water.

Fishing is an old practice steeped in tradition, but throughout the ship, modern navigation equipment made it possible to fish more efficiently by plotting our locations while avoiding hazards such as natural formations and other vessels. Feats of engineering provided speed, power, drinkable water, and technological conveniences such as GPS, air conditioning, and Wi-Fi. In contrast to the natural evolution of sharks, these artificial adaptations provided many advantages at sea. To utilize the modern technology, however, literacy was required to input data and interpret the information on the dozens of monitors on board. Literacy and strong communication skills were required to understand and convey data to others. Reading and critical thinking allowed us to interpret maps and data, understand charts and graphs, and access news articles about the red tide we encountered.

I witnessed almost every person on board applying literacy skills throughout their day. Whether they were reading and understanding crucial written communication, reading instructions, selecting a dinner option from the menu, or referencing a field guide, they were applying reading strategies. In the offices and work spaces on board, there was no shortage of instructional manuals, safe operating procedures, informational binders, or wildlife field guides.

Writing helped to organize important tasks and schedules. To manage and organize daily tasks and responsibilities, many people utilized sticky notes and checklists. Computer and typing skills were also important. Some people were inputting data, writing research papers and projects, sharing their work through social media, or simply responding to work-related emails. The dive operation that I observed started as a thoroughly written dive plan. All of these tasks required clear and accurate written communication.

Junior Unlicensed Engineer (JUE) Jack Standfast holds a small notebook used for recording daily tasks and responsibilities.
Junior Unlicensed Engineer (JUE) Jack Standfast carried a small notebook in his pocket, recording the various engineering tasks he’d completed throughout the day.

Each day, I saw real-life examples of the strong ties between science and language arts. Recording accurate scientific data required measurement, weight, and observational skills, but literacy was required to read and interpret the data recording sheets. Neat handwriting and careful letter spacing were important for recording accurate data, reinforcing why we practice these skills in school. To ensure that a species was correctly identified and recorded, spelling could be an important factor. Throughout the experience, writing was essential for taking interview notes and brainstorming blog ideas, as well as following the writing process for my blog posts. If I had any energy left at the end of my day (usually around 2:00 AM), I consulted one of my shark field guides to read more about the intriguing species we saw.

 

Did You Know?

No need for a teething ring: Sharks begin shedding their teeth before they are even born. Shark pups (baby sharks) are born with complete sets of teeth. Sharks aren’t mammals, so they don’t rely upon their mothers for food after they’re born. They swim away and must fend for themselves, so those born-to-bite teeth come in handy.

Recommended Reading

Smart About Sharks written and illustrated by Owen Davey

Appropriate for older readers, the clever, comprehensive text offers interesting facts, tidbits, and trivia. The book dives a bit deeper to go beyond basic shark facts and knowledge. I’ve read hundreds of shark books, and I appreciated learning something new. The text doesn’t shy away from scientific terminology and concepts, such as phylogeny (eight orders of sharks and representative species). The facts reflect recent research findings on shark behavior. Lesser-known species are included, highlighting the diversity in body shapes, sizes, and specialized features. From a design standpoint, the aesthetically appealing illustrations are stylized, colorful, and engaging. Simple infographics provide explanations of complex ideas. Fact meets fiction in a section about shark mythology from around the world. The book concludes with a discussion of threats to sharks, as well as ocean conservation tips.

The cover of Smart About Sharks by Owen Davey.
Smart About Sharks written and illustrated by Owen Davey; published by Flying Eye Books, New York, 2016

 

Stephen Kade: the Art of the High Seas, September 21, 2018

NOAA Teacher at Sea

Stephen Kade

Aboard NOAA Ship Oregon II

July 23 – August 10, 2018

 

Mission: Long Line Shark/ Red Snapper survey Leg 1

Geographic Area: Southeastern U.S. coast

Date: September 21, 2018

Thresher by Kade
Watercolor painting of Thresher shark, Stephen Kade TAS 2018

 

Scientific Journal: 

While aboard the NOAA Ship Oregon II, I was able to create some art, which is my absolute passion in life. I was able use my time before and after most shifts to draw and paint the fish and sharks with watercolor paint and water from the ocean. It was tricky to paint with the constant movement of the ship, but I was able to paint over 20 paintings of sharks, fish, and the Oregon II over the 16 days on board the ship.

watercolor paintings
various watercolor paintings done aboard Oregon II, by Stephen Kade, TAS 2018

Now that I’ve been home for a month, I’ve had some time to reflect on my NOAA Teacher at Sea experience. If I told you my NOAA Teacher At Sea experience was incredible, I would be understating it quite a bit. I knew the excitement of working on the mighty NOAA Ship Oregon II and participating in the shark survey would be a highlight of my lifetime for sure. The opportunity to work with NOAA scientists, fishermen, and the rest of the crew was the best learning experience a teacher and artist could ask for. But just a week after returning, it was back to school and I needed to find ways to convey what I learned to my students. I began by creating a digital infographic about Longline Fishing so they would have a visual to go along with my explanation.

Longline Fishing infographic
Digital Longline Fishing infographic by Stephen Kade, TAS 2018

 

I wanted to inform my students to create awareness about the species of shark and other ocean inhabitants that are threatened and endangered. I also wanted them to learn science about the animals and incorporate some of that data into their art to make their images more impactful to those that see them. We want to compile related projects together until later in the year for our annual Night of the Arts- NOAA Edition.

Student Art
Student Art from OL Smith Middle School, Dearborn, MI

Student Art
Student Art from OL Smith Middle School, Dearborn, MI

We also created three life size Art Shark paintings and posted them in the hallways of our school to advocate for sharks through art and work to give sharks a more positive community image, and not the sensational, fearful media portrayal of sharks.

Student Art - Sand Tiger Shark
Student Art from OL Smith Middle School, Dearborn, MI

Sandbar Shark
Student Art from OL Smith Middle School, Dearborn, MI

painting of Great Hammerhead shark
3′ x 8′ painting of Great Hammerhead shark, Stephen Kade TAS 2018

As a fine artist painter, the Teacher At Sea experience has helped to make my artwork much more accurate for several reasons. Primarily the reason was proximity. I was able to see the sharks and fish first hand everyday, and take many reference photos of our catch each day. I could now see the beautiful colors of different sharks while out of the water, which I never had seen before. I was also able to speak to the fishermen and scientists each day about the behaviors and biology of the fish and I gained insight from listening to their vast experiences in the oceans all around the globe.

Since being home, I’ve begun to paint a series of scientifically accurate side views of my favorite sharks, and eventually I will digitally compile them into one poster after I get 15 to 18 completed. After that, I’ll begin a series of paintings with sharks swimming in their natural environment to bring more color and visual dynamics onto the canvas. This has been the most inspiring adventure of my life, and I will continue to advocate for my favorite ocean animals by using art to bring the respect and admiration that these beautiful sharks deserve to continue to thrive long into Earth’s distant future.

Kade_hammerhead
Watercolor painting of Great Hammerhead Shark by Stephen Kade, TAS 2018

Great White Shark
Watercolor painting of Great White Shark by Stephen Kade, TAS 2018

Anne Krauss: The Reel Whirl’d, September 15, 2018

NOAA Teacher at Sea

Anne Krauss

Aboard NOAA Ship Oregon II

August 12 – 25, 2018

 

Mission: Shark/Red Snapper Longline Survey

Geographic Area of Cruise: Western North Atlantic Ocean/Gulf of Mexico

Date: August 26, 2018

Weather Data from the Air

Conditions at 0634

Altitude: 9585 meters

Outside Temperature: -38 ℃

Distance to Destination: 362 km

Tail Wind: 0 km/h

Ground Speed: 837 km/h

(While NOAA Ship Oregon II has many capabilities, flight isn’t one of them. These were the conditions on my flight home.)

Science and Technology Log

The idea of placing an elementary school teacher on a Shark/Red Snapper Longline Survey seems like a reality show premise, and I couldn’t believe that it was my surreal reality. Several times a day, I took a moment to appreciate my surroundings and the amazing opportunity to get so close to my favorite creatures: sharks!

Anyone who knows me is aware of my obsession with sharks. Seeing several sharks up close was a hallowed, reverential experience. Reading about sharks, studying them through coursework, and seeing them on TV or in an aquarium is one thing. Being only a few feet away from a large tiger shark (Galeocerdo cuvier) or a great hammerhead (Sphyrna mokarran) is quite another. Seeing the sharks briefly out of the water provided a quick glimpse of their sinewy, efficient design…truly a natural work of art. Regardless of size, shape, or species, the sharks were powerful, feisty, and awe-inspiring. The diversity in design is what makes sharks so fascinating!

A tiger shark at the surface.
Even just a quick peek of this tiger shark (Galeocerdo cuvier) reveals her strong muscles and powerful, flexible design.

A large tiger shark lies on a support framework made from reinforced netting. The shark and the structure are being lifted out of the water.
This female tiger shark was large enough to require the shark cradle. The reinforced netting on the cradle provided support for the 10.5 foot shark.

The snout and eye of a sandbar shark being secured on a netted shark cradle.
The shape of this sandbar shark’s (Carcharhinus plumbeus) head and eye is quite different from the tiger shark’s distinct design.

A great hammerhead's cephalofoil.
Even in the dark, the shape of the great hammerhead’s (Sphyrna mokarran) cephalofoil is unmistakable.

I envied the remora, or sharksucker, that was attached to one of the sharks we caught. Imagine being able to observe what the shark had been doing, prior to encountering the bait on our longline fishing gear. What did the shark and its passenger think of their strange encounter with us? Where would the shark swim off to once it was released back into the water? If only sharks could talk. I had many questions about how the tagging process impacts sharks. As we started catching and tagging sharks, I couldn’t help but think of a twist on the opening of MTV’s The Real World: “…To find out what happens…when sharks stop being polite…and start getting reeled.

Sadly for my curiosity, sharks have yet to acquire the ability to communicate verbally, despite their many advantageous adaptations over millions of years. To catch a glimpse of their actions in their watery world, scientists sometimes attach cameras to their fins or enlist the help of autonomous underwater vehicles (AUVs) to learn more. The secret lives of sharks… reality TV at its finest.

Underwater camera footage is beginning to reveal the answers to many of the questions my Kindergarten-5th grade students have about sharks:

How deep can sharks swim?

How big can sharks get? How old can sharks get?

Do sharks sleep? Do sharks stop swimming when they sleep? Can sharks ever stop swimming? 

Do sharks have friends? Do sharks hunt cooperatively or alone?

Is the megalodon (Carcharocles megalodon) still swimming around down there? (This is a very common question among kids!)

The answers vary by species, but an individual shark can reveal quite a bit of information about shark biology and behavior. Tagging sharks can provide insight about migratory patterns and population distribution. This information can help us to better understand, manage, and protect shark populations.

Various tools are spread out and used to weigh (scale), collect samples (scissors and vials), remove hooks (pliers, plus other instruments not pictured), apply tags (leather punch, piercing implement, and tags), and record data (clipboard and data sheet).
These tools are used to weigh (scales on bottom right), collect samples (scissors and vials), remove hooks (pliers, plus other instruments not pictured), apply tags (leather punch, piercing implement, and tags), and record data (clipboard and data sheet).

Using several low-tech methods, a great deal of information could be gleaned from our very brief encounters with the sharks we caught and released. In a very short amount of time, the following information was collected and recorded:

• hook number (which of the 100 longline circle hooks the shark was caught on)
• genus and species name (we recorded scientific and common names)
• four measurements on various points of the shark’s body (sometimes lasers were used on the larger sharks)
• weight (if it was possible to weigh the shark: this was harder to do with the larger, heavier sharks)
• whether the shark was male or female, noting observations about its maturity (if male)
• fin clip samples (for genetic information)
• photographs of the shark (we also filmed the process with a GoPro camera that was mounted to a scientist’s hardhat)
• applying a tag on or near the shark’s first dorsal fin; the tag number was carefully recorded on the data sheet
• additional comments about the shark

Finally, the hook was removed from the shark’s mouth, and the shark was released back into the water (we watched carefully to make sure it swam off successfully)!

A metal tag is marked with the number eight. This is one of 100 used in longline fishing.
Longline fishing uses 100 numbered hooks. When a fish is caught, it’s important to record the hook number it was caught on.

Two kinds of shark tags: plastic swivel tags used for smaller sharks and dart tags used for larger sharks.
Depending on the shark’s size, we either attached a swivel tag (on left and middle, sometimes called a Rototag or fin tag; used for smaller sharks) or a dart tag (on right, sometimes called an “M” tag; used for larger sharks).

For more information on shark tagging: https://www.nefsc.noaa.gov/nefsc/Narragansett/sharks/tagging.html 

This slideshow requires JavaScript.

Other fish were retained for scientific samples. Yellowedge grouper (Epinephelus flavolimbatus), blueline tilefish (Caulolatilus microps), and red snapper (Lutjanus campechanus) were some of species we caught and sampled. Specific samples from specific species were requested from various organizations. Generally, we collected five different samples:

• fin clips: provide genetic information
• liver: provides information about the health of the fish, such as the presence of toxins
• muscle tissue: can also provide information about the health of the fish
• gonads: provide information about reproduction
• otoliths: These bony structures are found in the inner ear. Similar to tree rings, counting the annual growth rings on the otoliths can help scientists estimate the age of the fish.

A yellowedge grouper on a table surrounded by sampling equipment.
Samples were taken from this yellowedge grouper (Epinephelus flavolimbatus).

Samples were preserved and stored in vials, jars, and plastic sample bags, including a Whirl-Pak. These bags and containers were carefully numbered and labeled, corresponding with the information on the data sheets. Other information was noted about the fish, including maturity and stomach contents. Sometimes, photos were taken to further document the fish.

 

Personal Log

Thinking of the Oregon II as my floating classroom, I looked for analogous activities that mirrored my elementary students’ school day. Many key parts of the elementary school day could be found on board.

A 24-hour analog clock.
Sometimes, my students struggle to tell the time with analog clocks. The ship uses military time, so this 24-hour clock would probably cause some perplexed looks at first! We usually ate dinner between 1700-1800.

Weights, an exercise bike, resistance bands, and yoga mats.
Physical Education: Fitness equipment could be found in three locations on the ship.

A dinner plate filled with cooked vegetables.
Health: To stay energized for the twelve-hour shifts, it was important to get enough sleep, make healthy food choices, and stay hydrated. With lots of exercise, fresh air, and plenty of water, protein, and vegetables, I felt amazing. To sample some local flavors, I tried a different hot sauce or Southern-style seasoning at every meal.

A metal first aid cabinet.
There wasn’t a nurse’s office, but first aid and trained medical personnel were available if needed.

With my young readers and writers in mind, I applied my literacy lens to many of the ship’s activities. Literacy was the thread that ran through many of our daily tasks, and literacy was the cornerstone of every career on board. Several ship personnel described the written exams they’d taken to advance in their chosen careers. Reading and writing were used in everything from the recipes and daily menu prepared by Second Cook Arlene Beahm and Chief Steward Valerie McCaskill in the galley to the navigation logs maintained by Ensign Chelsea Parrish on the ship’s bridge.

A clipboard shows the daily menu for breakfast, lunch, and dinner.
The menu changed every day. You could also make your own salad, sandwiches, and snacks. If you had to work through mealtime, you could ‘save-a-meal,’ and write down your food choices to eat later. This was kind of like indicating your lunch choice at school. Instead of a cafeteria, food was prepared and cooked in the ship’s galley.

Shelves of books in the ship's library.
Library: The ship had a small library on board. To pass the time, many people enjoyed reading. (And for my students who live vicariously through YouTube: that sign at the bottom does say, ‘No YouTube’! Computers were available in the lab, but streaming wasn’t allowed.)

I often start the school year off with some lessons on reading and following directions. In the school setting, this is done to establish routines and expectations, as well as independence. On the ship, reading and following directions was essential for safety! Throughout the Oregon II, I encountered lots of printed information and many safety signs. Some of the signs included pictures, but many of them did not. This made me think of my readers who rely on pictures for comprehension. Some important safety information was shared verbally during our training and safety drills, but some of it could only be accessed through reading.

A collage of safety-related signs on the ship. Some have pictures, while others do not.
Without a visual aid, the reader must rely on the printed words. In this environment, skipping words, misreading words, or misunderstanding the meaning of the text could result in unsafe conditions.

A watertight door with a handle pointing to 'open'.
On a watertight door, for example, overlooking the opposite meanings of ‘open’ and ‘closed’ could have very serious consequences.

A watertight door with a handle pointing to 'closed'.
Not being able to read the sign or the words ‘open’ and ‘closed’ could result in a scary situation.

 

Did You Know?

Thomas Jefferson collected fossils and owned a megalodon tooth. The Carcharocles megalodon tooth was found in South Carolina. One of the reasons why Jefferson supported expeditions to lands west of the Mississippi? He believed that a herd of mammoths might still be roaming there. Jefferson didn’t believe that animal species could go extinct, so he probably liked the idea that the megalodon was still swimming around somewhere! (There’s no scientific evidence to support the idea that either Thomas Jefferson or the megalodon are still around.)

Recommended Reading

If Sharks Disappeared written and illustrated by Lily Williams

This picture book acknowledges the scariness of sharks, but explains that a world without sharks would be even scarier. Shown through the eyes of a curious young girl and her family, the book highlights the important role that sharks play in the ocean food web. As apex predators, sharks help to keep the ocean healthy and balanced.

The book includes some mind-blowing facts, such as the concept that sharks existed on Earth before trees. Through easy-to-follow examples of cause and effect, the author and illustrator explores complex, sophisticated concepts such as overfishing, extinction, and trophic cascade. The glossary includes well-selected words that are important to know and understand about the environment. Additional information is provided about shark finning and ways to help save sharks. An author’s note, bibliography, and additional sources are also included.

The cover of a children's book about the important role that sharks fill in the ocean food web.
If Sharks Disappeared written and illustrated by Lily Williams; Published by Roaring Brook Press, New York, 2017

 

Ashley Cosme: Deploying a Longline – September 4, 2018

Remora

NOAA Teacher at Sea

Ashley Cosme

Aboard NOAA Ship Oregon II

August 31 – September 14, 2018

 

Mission: Shark/Red Snapper Longline Survey

Geographic Area of Cruise: Gulf of Mexico

Date:  September 4th, 2018

Longline sites
Primary longline stations are indicated in purple. The red line represents the path the Oregon II.

Weather Data from the Bridge:

  • Latitude: 28 02.2N
  • Longitude: 96 23.8W
  • Wind speed: 13 Knots
  • Wind direction: 080 (from North)
  • Sky cover: Broken
  • Visibility: 10 miles
  • Barometric pressure:  1014.1atm
  • Sea wave height: 2 feet
  • Sea Water Temp: 30.6°C
  • Dry Bulb: 28.1°C
  • Wet Bulb: 25.3°C

 

Science and Technology Log:

After a long two day cruise to the southern tip of Texas, we finally started fishing.  I learned quickly that everyone has a job, and when you are done with your job, you help members of your team complete their tasks.  The coordinates of all of the survey locations are charted using a program called Novel Tec, and once the captain has determined that we have reached our designated location, the fun begins.  To deploy the longline there are many important responsibilities that are delegated by the Chief NOAA Scientist.

Baited hooks
Baited hooks

 

#1- All scientists work together to bait 100 hooks with mackerel (Scomber scombrus).

 

 

 

 

 

High Flyer
High-Flyer deployment

 

 

 

#2- High-Flyer Release – Once the long line has been attached to the high-flyer, it is released from the stern of the boat.  The high-flyer consists of a buoy to keep it above water, and a flashing light, so we know the exact location of the beginning of the longline.

 

 

 

 

 

Attaching a weight
Attaching a weight and TDR

 

#3 Weight Attachment – A NOAA fisherman is responsible for attaching the weight at the appropriate distance, based on the depth of that station to ensure the gear is on the sea floor.  This  also keeps the high-flyer from drifting.  Alongside the weight, a TDR is attached to the line, which records temperature and depth.

 

 

 

numbered hooks
Each baited hook is identified with a number.

 

 

 

#4 Numbering of baited hooks – After the first weight goes out, one by one the gangions are numbered and set over the edge of the ship, but not let go.  A gangion consists of a 12ft line, a baited hook, and hook number.

 

 

 

 

 

 

Attaching the Hooks
Attaching the Hooks

# 5 Hook Attachment – A NOAA fisherman will receive one gangion at a time, and attach it to the line.  Another weight is attached to the line after 50 hooks have been deployed, and once all 100 hooks are deployed the final weight is attached.  Then the line is cut, and the second high-flyer is attached and set free to mark the end of the survey area.  This process goes fairly quickly, as the longline is continuously being fed into the water.

 

Data Collection
Data Collection

 

#6 Data Collection – Each piece of equipment that enters the water is recorded in a database on the computer.  There should always be 2 high-flyers, 3 weights, and 100 gangions entered into the database.

 

 

 

 

 

Scrubbing buckets
Scrubbing buckets

 

 

 

#7 Bucket Clean-up – The buckets that were holding the baited hooks need to be scrubbed and prepared for when we haul the line back in.

 

 

 

 

 

 

Once all of the gear is in the water we wait for approximately one hour until we start to haul back each hook one by one.  The anticipation is exciting to see if a shark or other fish has hooked itself.

Longline Fishing infographic
This image illustrates what the longline, including all the gear, would look like once completely placed in the water. (Image courtesy of Stephan Kade, 2018 Teacher at Sea).

 

Personal Log

I would say that my body has fully adjusted to living at sea.  I took off my sea sickness patch and I feel great!  Currently, Tropical Storm Gordon is nearing to hit Mississippi this evening.  We are far enough out of the storm’s path that it will not affect our fishing track.  I am having the time of my life and learning so much about the Oregon II, sharks, and many other organisms that we’ve seen or caught.

Remora
This sharksucker (Echeneis nautratus) was sucking on a blacktip shark that we caught. He instantly attached to my arm to complete his duty as a cleaner fish.

Did you know?:

Engineers.jpg
William Osborn (1st Engineer) and Fred Abaka (3rd Engineer).

NOAA Ship Oregon II creates freshwater via reverse osmosis.  Sea water is pumped in and passed through a high pressure pump at 1,000psi.  The pump contains a membrane (filter), which salt is too big to pass through, so it is disposed overboard.  The clean freshwater is collected and can be used for showering, cooking, and drinking.  In addition to creating freshwater, the engineers are also responsible for the two engines and the generators.

 

 

 

Animals Seen:

Pantropical Spotted dolphins (Stenella attenuate)

Blacknose Shark (Carcharhinus acronotus)

Sharpnose Shark (Rhizoprionodon terraenovae)

Smoothhound Dogfish (Mustelus sinusmexicanus)

Blacktip Shark (Carcharhinus limbatus)

Red Snapper (Lutjanus campechanus)

Sharksucker (Echeneis nautratus)