Month: August 2009

Posted on

Patricia Schromen, August 22, 2009

NOAA Teacher at Sea
Patricia Schromen
Onboard NOAA Ship Miller Freeman
August 19-24, 2009 

Mission: Hake Survey
Geographical Area: Northwest Pacific Coast
Date: Thursday, August 22, 2009

Bringing in the nets requires attention, strength and teamwork.
Bringing in the nets requires attention and teamwork.

Weather Data from the Bridge 
SW wind 10 knots
Wind waves 1 or 2 feet
17 degrees Celsius

Science and Technology Log 

In Science we learn that a system consists of many parts working together. This ship is a small integrated system-many teams working together. Each team is accountable for their part of the hake survey. Like any good science investigation there are independent, dependent and controlled variables. There are so many variables involved just to determine where and when to take a fish sample.

Matt directs the crane to move to the right. Looks like some extra squid ink in this haul.
Matt directs the crane to move to the right. Looks like some extra squid ink in this haul.

The acoustic scientists constantly monitor sonar images in the acoustics lab. There are ten screens displaying different information in that one room. The skilled scientists decide when it is time to fish by analyzing the data.  Different species have different acoustical signatures. Some screens show echograms of marine organisms detected in the water column by the echo sounders. With these echograms, the scientists have become very accurate in predicting what will likely be caught in the net. The OOD (Officer of the Deck) is responsible for driving the ship and observes different data from the bridge. Some of the variables they monitor are weather related; for example: wind speed and direction or swell height and period. Other variables are observed on radar like the other ships in the area. The topography of the ocean floor is also critical when nets are lowered to collect bottom fish. There are numerous sophisticated instruments on the bridge collecting information twenty four hours a day. Well trained officers analyze this data constantly to keep the ship on a safe course.

Here come the hake!
Here come the hake!

When the decision to fish has been made more variables are involved. One person must watch for marine mammals for at least 10 minutes prior to fishing. If marine mammals are present in this area then they cannot be disturbed and the scientists will have to delay fishing until the marine mammals leave or find another location to fish. When the nets are deployed the speed of the boat, the tension on the winch, the amount of weight attached will determine how fast the nets reach their target fishing depth.  In the small trawl house facing the stern of the ship where the trawl nets are deployed, a variety of net monitoring instruments and the echo sounder are watched. The ship personnel are communicating with the bridge; the deck crew are controlling the winches and net reels and the acoustic scientist is determining exactly how deep and the duration of the trawl. Data is constantly being recorded. There are many decisions that must be made quickly involving numerous variables.

Working together to sort the squid from the hake.
Working together to sort the squid from the hake.

The Hake Survey began in 1977 collecting every three years and then in 2001 it became a biannual survey. Like all experiments there are protocols that must be followed to ensure data quality. Protocols define survey operations from sunrise to sunset. Survey transect line design is also included in the protocols. The US portion of the Hake survey is from approximately 60 nautical miles south of Monterey, California to the US-Canada Border. The exact location of the fishing samples changes based on fish detected in the echograms although the distance between transects is fished at 10 nautical miles. Covering depths of 50-1500 m throughout the survey. Sampling one species to determine the health of fish populations and ocean trends is very dynamic.

Weighing and measuring the hake is easier with automated scales and length boards.
Weighing and measuring the hake.

Personal Log 

Science requires team work and accountability. Every crew member has an integral part in making this survey accurate.  A willing positive attitude and ability to perform your best is consistently evident on the Miller Freeman. In the past few days, I’ve had the amazing opportunity to assist in collecting the data of most of the parts of this survey, even launching the CTD at night from the “Hero Platform” an extended grate from the quarter deck.

Stomach samples need to be accurately labeled and handled carefully.
Stomach samples need to be accurately labeled and handled carefully.

Before fishing, I’ve been on the bridge looking for marine mammals.  When the fish nets have been recovered and dumped on the sorting table, I’ve sorted, weighed and measured fish. For my first experience in the wet lab, I was pleased to be asked to scan numbers (a relatively clean task) and put otoliths (ear bones) into vials of alcohol. I used forceps instead of a scalpel. Ten stomachs are dissected, placed in cloth bags and preserved in formaldehyde. A label goes into each cloth bag so that the specimen can be cross referenced with the otoliths, weight, length and sex of that hake. With all the high tech equipment it’s surprising that a lowly pencil is the necessary tool but the paper is high tech since it looks regular but is water proof.  It was special to record the 100th catch of the survey.

Removing the otolith (ear bone) with one exact incision. An otolith reminds me of a squash seed or a little silver feather in jewelry.
Removing the otolith (ear bone) with one exact incision. An otolith reminds me of a squash seed or a little silver feather in jewelry.
Each barcoded vial is scanned so the otolith number is linked to the weight, length and sex data of the individual hake.
Each barcoded vial is scanned so the otolith number is linked to the weight, length and sex data of the individual hake.

Questions for the Day 

How is a fish ear bone (otolith) similar to a tree trunk? (They both have rings that can be counted as a way to determine the age of the fish or the tree.)

The CTD (conductivity, temperature and depth) unit drops 60 meters per minute and the ocean is 425 meters deep at this location; how many minutes will it take the CTD to reach the 420 meter depth?

Think About This: The survey team directs the crane operator to stop the CTD drop within 5 meters of the bottom of the ocean.  Can you think of reasons why the delicate machinery is never dropped exactly to the ocean floor?  Some possible reasons are:

  • The swell in the ocean could make the ship higher at that moment;
  • An object that is not detected on the sonar could be on the ocean floor;
  • The rosetta or carousel holding the measurement tools might not be level.

Launching the CTD is a cooperative effort. The boom operator works from the deck above in visual contact. Everyone is in radio contact with the bridge since the ship slows down for this data collection.

Retrieving the CTD
Retrieving the CTD
Posted on

Patricia Schromen, August 20, 2009

NOAA Teacher at Sea
Patricia Schromen
Onboard NOAA Ship Miller Freeman
August 19-24, 2009 

Mission: Hake Survey
Geographical Area: Northwest Pacific Coast
Date: Thursday, August 20, 2009

Ensign Heather Moe coming aboard the Miller Freeman in Port Angeles, Washington
Ensign Heather Moe coming aboard the Miller Freeman in Port Angeles, Washington

Weather Data from the Bridge 
SW wind 10 knots
Wind waves 1 or 2 feet with swell 6 feet at 10 seconds
17 degrees Celsius
Areas of fog

Science and Technology Log 

The Miller Freeman docked in the Port Angeles harbor two days earlier than scheduled. Repair was needed on the trawling net reel. Then the bow thruster wasn’t cooperating on Tuesday so departure was delayed until Wednesday. Once at sea, the ship must be self reliant 24 hours a day seven days a week.  Everyone and everything work together.  Team work and cooperation are critical. Many different careers are on board.  Smooth operation of the Miller Freeman relies on each department performing specific assignments.  Some of these departments are:

  • NOAA Corps- commissioned officers who pilot the ship
  • Scientists-oceanographers, fisheries biologists and data analysts
  • Deck Dept.-maintain the ship and launch the survey equipment
  • Engineering Dept.-operate all ships mechanical systems
  • Steward Dept.-prepare meals
  • Electronics Technician – manages ship’s computers and network
  • Survey Department – assist the scientists with data collection and equipment

Some people have PhDs while others may have acquired skills from on the job training.  Most people seem to like the challenge of solving problems like how to weld an extra guide stick with the materials on board or how to map the course to the fishing transects. The opportunities seem as endless as the vast waters of the ocean.

Personal Log 

During our safety drill, I grab these essentials from my stateroom and muster, or go to the upper deck.
During our safety drill, I grab these essentials from my stateroom and muster, or go to the upper deck.

Learning my way around the ship is one of my first tasks and everyone has been so very helpful. There are many hatches and steep ladders (stairs) to the different decks. Safety includes knowing how to exit quickly and how to put on a life suit in less than one minute.  Like a fire drill at school we will have a fire or abandon ship drill sometime today. When I hear the ship’s alarm I must go to my stateroom, grab 4 things:  my life preserver, bag with life suit, long sleeve shirt and hat then muster to the lab deck. There I slip off my shoes, shake the suit out of the bag, lay it out, sit in the middle, wiggle my legs in, kneel down, put in my left arm, pull up the hat, put in my right arm, arch my back and zip it up to my nose. With clear “how to” directions and practice given by my chief scientist, Larry Hufnagle, I’m ready for the mandatory drill.

Question of the Day 
Why would you rather load a ship at high tide?

Something to Think About 
When I departed the ship in the evening I had to walk down the gang plank but when I returned the next morning the gang plank was level.  I only had to walk straight across to board the ship.  The ship was at the exact same dock and no one moved the gang plank. What variable made the angle of the gang plank change?

Deck crew preparing to load gang plank Tuesday afternoon, 3:30 pm
Deck crew preparing to load gang plank Tuesday afternoon, 3:30 pm
This life suit looks like a good fit for me.
This life suit looks like a good fit for me.
Posted on

Christine Hedge, August 20, 2009

NOAA Teacher at Sea
Christine Hedge
Onboard USCGC Healy
August 7 – September 16, 2009 

Mission: U.S.-Canada 2009 Arctic Seafloor Continental Shelf Survey
Location: Beaufort Sea, north of the arctic circle
Date: August 20, 2009

Weather Data from the Bridge  
Lat: 80.570 N
Long: 151.320 W
Air Temp: 29.210 F

Science and Technology Log 

The science computer lab is where the data is observed. Processors clean the data of all the extraneous noise and spikes. Not every beam is returned and some take a bad bounce off a fish, chunk of ice or a bubble.
The science computer lab is where the data is observed. Processors clean the data of all the extraneous noise and spikes. Not every beam is returned and some take a bad bounce off a fish, chunk of ice or a bubble.

The Healy is collecting bathymetric data on this trip.  Bathymetric data will tell us how deep the ocean is and what the terrain of the ocean floor is like.  Less than 6% of the floor of the Arctic Ocean has been mapped.  So, this data will help us to learn about some places for the very first time.  The word bathymetry comes from the Greek – bathy= deep and metry = to measure.

NOTE TO STUDENTS: If you learn Latin/Greek word parts you can understand almost any word! 

How Do We Collect This Data? 

There are two main devices the Healy is using to measure the depth to the seafloor.  One is called the multibeam echosounder. It sends a beam of sound, which reflects off the bottom and sends back up to 121 beams to a receiver. By measuring the time it takes for the sound to return the multibeam can accurately map the surface of the sea floor.  This allows the multibeam to “see” a wide swath of seafloor – kilometers wide.  The other device is bouncing a single beam off the bottom and “seeing” a profile of that spot. This one is called a single beam echosounder or sub-bottom profiler. The single beam actually penetrates the sea floor to show a cross-section of the layers of sediment. Both are mounted on the hull of the ship and send their data and images to computers in the science lab.

What Does Mrs. Hedge Do? 

This screen shows the multibeam bathymetry data. Depth is measured over a swath about 8 kilometers wide on this particular screen. Purple is the deepest (3850 m) and orange is the most shallow (3000 m). You can see that for most of this trip we were on flat abyssal plain and then we hit a little bump on the sea floor about 450 meters tall.
This screen shows the multibeam bathymetry data. Depth is measured over a swath about 8 kilometers wide on this particular screen. Purple is the deepest (3850 m) and orange is the most shallow (3000 m). You can see that for most of this trip we were on flat abyssal plain and then we hit a little bump on the sea floor about 450 meters tall.

The science crew takes turns “standing watch”. We have 3 teams; each watches the computers that display the bathymetry data for an 8-hour shift. My watch is from 8 am until 4 pm.  We need to look at how many beams are being received and sometimes make adjustments.  Traveling through heavy ice makes data collection challenging. We also need to “log” or record anything that might impact the data collection such the ship turning, stopping, heavy ice, or a change in speed. When we are going over an interesting feature on the seafloor, our job is engaging. When the seafloor is flat, the 8-hour shift can seem pretty long!

How Did People Do This Before Computers? 

Until the 1930’s, the depth of the ocean was taken by lowering a lead weight on a heavy rope over the side of a boat and measuring how much rope it took until the weight hit the bottom. This was called a lead line.  Then the boat would move and do this again, over and over.

Another bear was spotted from the Healy. Photo Pat Kelley.
Another bear was spotted from the Healy. Photo Pat Kelley.

This method was very time consuming because it only measured depth at one point in time.    Between soundings, people would just infer what the depth was.  Using sound to measure depth is a huge improvement compared to soundings with a weighted rope.  For example, in 100 meters of water, with a lead line 10 soundings per hour could be obtained.  With multibeam at the same depth, 1,500,000 soundings can be obtained per hour.  Mapping the ocean floor has become much more accurate and precise.

FOR MY STUDENTS: Can you think of other areas of science where improvements in technology lead to huge improvements and new discoveries? 

Personal Log 

When a polar bear is spotted, the deck fills with hopeful observers.
When a polar bear is spotted, the deck fills with hopeful observers.

Last night, there was an announcement right after I went to bed that polar bears had been spotted.  I threw on some clothes and ran outside.  There was a female and cub 2 kilometers away.  With binoculars, I could see them pretty well.  The adult kept turning around and looking at the cub over her shoulder. I suspect, the cub was being told to hurry up!  When a bear is spotted, the deck of the ship fills up with hopeful observers no matter what time of day it is.

FOR MY STUDENTS: I heard that the old polar bear at the Indianapolis Zoo died recently. Will there still be a polar bear exhibit at the zoo?  What are the plans for the future? 

Posted on

Rita Larson, August 19, 2009

NOAA Teacher at Sea
Rita Larson
Onboard NOAA Ship Rainier
August 10 – 27, 2009 

Sunset over Kachemak Bay
Sunset over Kachemak Bay

Mission: Hydrographic Survey
Geographical Area of the Cruise: Kasitsna Bay, AK
Date: August 19, 2009

Weather Data from the Bridge 
Latitude: 59° 28.339′N Longitude: 151° 33.214′W
Sea Water Temperature: 10°C (50°F)
Air Temperature: Dry Bulb: 11.1°C (52°F) Wet Bulb: 10.0°C (50°F)
Visibility: 5 miles

Science and Technology Log 

A launch from the Rainier
A launch from the Rainier

I would like to give a very brief explanation of how surveying becomes a nautical chart. When all the surveying launches return to the Rainier, a debriefing meeting takes place in the wardroom. All the hydrographersin-charge or “Hicks” give a short discripition of the successes and complications they had during surveying for the day. At least one night processor attends these debriefing meetings to have a good understanding of what to expect as they process this data. Some of the things the night processors are looking for are:  How many CTD (conductivity, temperature, depth) casts were made from each launch? Were there any data problems, such as noisy data or gaps in coverage? Then, the night processors collect the Hypack and Hysweep data from the launches and transfer the surveys to the ship’s computers where they will process it with CARIS. The night processors use the program CARIS to convert the “RAW” information from the launches into processed data. This processed data has correctors such as tide and SVP applied to it. This is completed in the plotting room on board the Rainier. The data is then cleaned and examined for problems.

Polygons regions
Polygons regions

This process produces a smooth image depicting the water depth over the area surveyed for the sheet managers. When this is complete, the sheet manager sets up for the next day’s acquisitions and polygon plans for all of the launches. Then, this information is sent to the Pacific Hydrographic Office to further examine the bathymetric data. After that, cartographers use this information to create nautical charts. The U.S. Coast Guard, U.S. Navy, as well as civilian mariners use nautical charts worldwide. This entire process may takes up to a year to complete.

These are various images of data completed during night processing. (Pictures taken by Nick Mitchell.)
Various images of data completed during night processing. (Pictures by Nick Mitchell.)

Personal Log 

I am so amazed in the way the professionals from NOAA work together and share the responsibilities for the purpose of creating safety for others. By creating these nautical charts, it makes the waters of the world a safer place to be. Everyone on the ship has a meaningful purpose and it is clear to me that they take great pride in what they contribute in the mission of the Rainier. I feel like I belong here after such a short time.

Animals I Saw Today  
A bald eagle in a tree using the large binoculars nicknamed, “big eyes” from the Rainier. I also saw a sea otter.

Nautical chart of the geographical area the Rainier is surveying at this time.
Nautical chart of the area the Rainier is surveying at this time.
Posted on

Christine Hedge, August 19, 2009

NOAA Teacher at Sea
Christine Hedge
Onboard USCGC Healy
August 7 – September 16, 2009 

Mission: U.S.-Canada 2009 Arctic Seafloor Continental Shelf Survey
Location: Chukchi Sea, north of the arctic circle
Date: August 19, 2009

Weather Data from the Bridge   

Brittle star
Brittle star

LAT: 810 23’N
LONG: 1560 31’W
Air Temp: 28.27 0F

Science and Technology Log 

My fellow teacher at sea, Jon Pazol, and I wonder, “What kind of brittle star is this?” We think it is a Gorgonocephalus cf arcticus.
My fellow teacher at sea, Jon Pazol, and I wonder, “What kind of brittle star is this?” We think it is a Gorgonocephalus cf arcticus.

There isn’t much biology to be done on this cruise.  Our mapping mission is the main focus.  But, living things find a way of working their way into the picture.  We have a marine mammal and a community observer on board looking for whales, seals, polar bears, sea birds and other Arctic animals. Yesterday, a small Arctic Cod found its way into the seawater pipe in the science lab. And a few days ago, when the HARP instrument was pulled up, there was a brittle star attached to it. Jon Pazol (the ARMADA Teacher at Sea) and I are both biology types and we got excited about the opportunity to identify this creature from the Arctic Ocean.

Personal log 

Yoann, a student from France, enjoys his first corndog
Yoann, a student from France, enjoys his first corndog

I did not grow up in Indiana and have avoided eating a corndog until now.  Yoann Ladroit (from France) and I (from Connecticut) had our very first corndogs for lunch yesterday. We have enjoyed many different types of food on the Healy. Imagine stocking a ship with enough food for 120-130 people for months in the Arctic. When the Healy left Seattle they had a food inventory valued at $300,000. Ideally, this ship leaves port with enough food for a year. This is more than most Coast Guard cutters carry – but the Arctic is a unique place.  In other oceans, cutters can pull in to port and purchase fresh supplies. In the Arctic there are few ports and where there are ports – the food is VERY expensive. The Healy needs to be prepared to feed the crew, just in case they get beset (stuck in ice). So, they have staple foods ready for an emergency situation.

A forklift carries food supplies to the Healy
A forklift carries food supplies to the Healy

In Barrow, the Healy picked up many forklifts full of fresh produce and eggs. This will be the last fresh produce we get until September 16th when we return to shore. The Healy is one of the newest ships in the Coast Guard and has spacious facilities in the galley (kitchen) and the mess decks (dining room).  There are huge refrigerators, storage rooms and freezers for food. The gleaming stainless steel galley has computerized ovens with probes that sense when the food has reached the correct temperature and a huge and speedy dishwasher. As a newcomer to the ship we were warned about the powerful microwave oven, which heats anything in 10 seconds and garbage disposal (affectionately called the Red Goat) which grinds up all food waste instantly.

This area, called the mess, is where we eat our meals.
This area, called the mess, is where we eat our meals.

We eat in the mess decks.  Our mess decks are twice the size of those on other Coast Guard cutters.  Meals are served 4 times each day. Breakfast, lunch, and dinner are served at the regular times.  Since people work 24/7, a fourth meal called Mid-rats (midnight rations) is served each night at 11pm.   One of the interesting features in the mess decks is the operating room set up over one of the tables. Although the Healy has a state of the art sick bay, what if the sick bay was unusable because of a fire or some other crisis? It seems that in a mass casualty situation, the mess decks doubles as a medical space, which would be used to tend to wounded personnel.