NOAA Teacher at Sea: Caroline Singler
Ship: USCGC Healy
Mission: Extended Continental Shelf Survey
Geographical area of cruise: Arctic Ocean 41 miles north of Alaska
Date: 9 August 2010
Seeing the Bottom — 7 August 2010
Latitude: 72º12.72’N
Ship Speed: 7.7 knots
Air Temperature: 0.5ºC /32.9ºF
Barometric Pressure: 1012.7 millibars Humidity: 86.3%
Winds: 19.3 Knots NE
Sea Temperature: -1.2ºC Salinity: 25.5 PSU
Water Depth:2547.8 mDate: 9 August 2010
Latitude: 72º 29.8’N
Ship Speed: 6.3 knots
Air Temperature: -0.03ºC /31.94ºF
Barometric Pressure: 1009.7 millibars Humidity: 92.2%
Winds: 17.7 Knots NE
Sea Temperature: -1.2ºC Salinity: 25.08 PSU
Water Depth:2969.0 mScience and Technology Log
The primary objectives of the science mission are to map the seafloor and image the underlying sediments. Bathymetry is the measurement of depth of water bodies, derived from the Greek bathos meaning deep and metria meaning measure. Early bathymetric surveys used the “lead-lining” method, in which depths are manually recorded using a weighted line. This method is slow and labor intensive, and it is not practical for depths greater than about 100 feet. (Ironically, I spent the summer of 2009 doing just such a survey of a small lake on Long Island, NY working with two other teachers as DOE-ACTSinterns at Brookhaven National Laboratory.) Modern bathymetric surveys use echo sounding, or SONAR (Sound Navigation and Ranging) to determine depth and shape of the seafloor. These systems make it possible to map large areas in extreme detail, leading NOAA to name the 20th Century advancements in hydrographic surveying techniques to its list of Top Ten Breakthroughs during the agency’s first 200 years.SONAR uses sound signals to locate objects beneath the sea surface. Passive systems use receivers such as hydrophones to detect signals transmitted by other sources, such as animals or submarines. Active systems transmit and receive signals. A transmitter mounted on the ship’s hull emits a signal. The signal travels through the water column and bounces off an object in its path. It returns as an echo to a transmitter on the ship that measures the strength of the return signal. The time between transmission and reception is used to determine range, where range equals (speed of sound in seawater) times (travel time divided by 2). When the object that reflects the signal is the seafloor, the range is the water depth.
There are single beam and multibeam sonar systems. Single beam systems measure along a single line beneath the ship and produce a line of depths. Multibeam systems send signals out along a line perpendicular to the ship and generate a “swath” of data for the area beneath the ship. The advantage of this system is that it creates a map that shows depth and shape of the seafloor. The diagram below shows a schematic comparison of three bottom survey methods.
The end result is a detailed map of the seafloor in which different colors represent different depths. The picture below shows an image of the raw multibeam data superimposed on a seafloor map which we can see on the ship’s Map Server display. The red line shows the ship’s track, and the new multibeam data extends perpendicular to that line. Other data on the map are from transects mapped on earlier Healy cruises and other sources.
NOAA Ocean Explorer http://oceanexplorer.noaa.gov/technology/technology.html
NOAA 200th Top Tens – The Breakthroughs
http://celebrating200years.noaa.gov/breakthroughs/welcome.html
Late Saturday morning, we crossed out of ice and back into open water. As we approached the last pieces of ice before open water, I saw waves hitting the distant edges of the ice; it looked like waves breaking on the shore. At first, I did not grasp the significance of this observation – I thought it was pretty and snapped some pictures and marveled at how we could be in thick ice and then suddenly in open water.
In the next hour, I realized that these were the largest waves we had encountered so far on the trip, and while they looked pretty, they also made the ship roll considerably more than it had before. Over the next few hours, I began to sense the movement more than I had in a few days. By dinner time, I had difficulty walking straight across the mess deck, and I was becoming a little apprehensive. I took a motion sickness pill as a preventative measure, and I took a nap because it was far more pleasant to lie in my rack and be rocked by the ship’s motion than to try to remain vertical. We eventually moved into calmer waters, and soon after that, we were back in heavy ice, which I somehow do not find as unpleasant as the waves. Since then, our movement has been slow and steady along our transects through the ice, with an emphasis on slow.
We don’t get much darkness up here in the Arctic, but we do occasionally get treated to some great sunrises and sunsets, if one is awake to catch them. Here are some photos of the sunset on Saturday 7 August 2010. The first was taken about an hour before sunset from the port side of the ship. I was as captivated by the horsetail clouds as I was by the color of the sky. The second was taken just at sunset, right before my camera battery died!
