Katie Turner, July 26, 2008

NOAA Teacher at Sea
Katie Turner
Onboard NOAA Ship Miller Freeman
July 10 – 31, 2008

Mission: Pollock Survey
Geographical Area: Eastern Bering Sea
Date: July 26, 2008

Rescue crew retrieves a dummy man overboard. It is a maritime custom to refer to the man overboard as “Oscar." This comes from an international regulation requiring the raising of the Oscar flag when a vessel is responding to a man overboard, warning other vessels to be on the lookout
Rescue crew retrieves a dummy man overboard. It is a maritime custom to refer to the man overboard as “Oscar.” This comes from an international regulation requiring the raising of the Oscar flag when a vessel is responding to a man overboard, warning other vessels to be on the lookout

Weather Data from the Bridge 
Visibility:  3 miles
Wind Direction:  050
Wind Speed:  8 knots
Sea Wave Height:  0-1 foot
Swell Wave Height:  2-3 feet
Seawater Temperature: 7.8˚ C.
Present Weather Conditions: cloudy

Science and Technology Log 

After leaving Captain’s Bay early Friday morning, the trip to the rendezvous point with OSCAR DYSON took nearly 20 hours. During that time we had our mandatory fire, abandon ship, and man overboard drills.  For our fire drill the Captain staged a mock fire, with smoke reported from the acoustics lab.  The fire fighting team had to respond, find the point of origin of the fire and figure out how to treat it. A debriefing was held afterward so that responders could discuss strategies and learn from the experience.

The rescue boat is brought back aboard the MILLER FREEMAN
The rescue boat is brought back aboard the MILLER FREEMAN

The abandon ship drill is regularly performed so all crew are ready to respond to a severe emergency by mustering at their assigned stations and getting into survival suits to be ready to board life rafts. It’s a good way for new crew members, such as me, to make sure they know where to go and what to bring. We made our rendezvous with OSCAR DYSON late Friday evening in the Bering Sea and immediately moved into position to run the first side by side transect. We are working on a comparison study to determine whether acoustic estimates of pollock (Theragra chalcogramma) abundance made by MILLER FREEMAN and OSCAR DYSON are comparable.  Pollock may have different behavioral responses to these vessels during surveys due to the differences in the amount of noise each vessel radiates into the sea from its propeller, engines, and other equipment.  These behaviors could affect the acoustic estimates of abundance.  OSCAR DYSON is taking over the task of acoustic pollock surveys in the Bering Sea and has been built under new specifications that require a lower level of radiated noise. MILLER FREEMAN has been doing the Bering Sea pollock surveys since 1977.  This study is important because it will ensure that future biomass estimates will be continuous with those done in the past. During this cruise the two ships will continuously collect acoustic backscatter data while traveling side by side along a transect line where pollock schools are known to occur. The distance between the two ships is maintained at 0.5 nautical miles (nm), while they travel at about 12 knots. Every 50 nm along the transect, the vessels switch sides.

OSCAR DYSON from the bridge of the MILLER FREEMAN in the Bering Sea
OSCAR DYSON from the bridge of the MILLER FREEMAN in the Bering Sea

For this to happen one vessel will slow down and cross behind the stern of the other vessel, then catch back up on the other side. The beginning and end of each transect section must be carefully coordinated between the scientific team in the acoustics lab The remainder of our time on this cruise will be spent working with the OSCAR DYSON to cover as much of the study area as possible before returning to the port of Dutch Harbor.  After the study is complete, the acoustic data collected by each vessel will be carefully compared to see if there is any consistent difference between them. At the same time officers on the bridge are in constant communication to coordinate navigation and maneuvering of the ships.

The figure above shows the final transect path of MILLER FREEMAN in the Bering Sea as straight lines in red. The parallel lines running nearly north and south were traversed from the east to the farthest westerly point. The zigzag red line across the parallel lines represents the path taken as we head back to the southwest on our return. Other colored lines on the map are depth contour lines.  Red lines indicate depths from -75 to -100 meters, yellow to -130 meters, green to -155 meters, and blue greater than  -160 meters.

Ship transect
Ship transect

Personal Log 

During these few days at sea the scientists onboard have taught me a lot about acoustic studies. It’s a complex science that requires both an understanding of the physical science of acoustics and the technology involved, but also the biology, behavior, and ecology of pollock.

One of the opportunities I have especially enjoyed has been watching and photographing the seabirds. They are an important part of this ecosystem and one that can be observed without acoustics. We have seen mostly northern fulmar (Fulmaris glacialis) and black-legged kittiwake (Rissa tridactyla), but also an occasional long-tailed jaeger (Stercorarius longicaudus), and flocks of thick-billed murre (Uria lomvia). Northern fulmar (Fulmaris glacialis) exhibit a lot of variation in color from very light, to light, and dark versions, with gradations in between. These different color morphs all mate indiscriminately. They are gull sized birds with moderately long wings, a short, stout, pale bill, and a short rounded tail. A key characteristic is their dark eye smudge.  They are common in the Bering Sea but also in the northeast Atlantic.

Northern fulmar, light morph
Northern fulmar, light morph
Northern fulmar, dark morph
Northern fulmar, dark morph

Fulmars are well known among commercial fisherman for scavenging waste thrown off fishing boats, which explains why they have been nearly constant companions to the MILLER FREEMAN on this cruise. Fulmars are members of the family Procellariiformes, also known as the “tube-nose” birds, along with albatrosses, petrels, and shearwaters. The term comes from the tubular nostril, a structure that looks like a tube on top of their beak.  Their beak, as you can see in the photo, is made up of many plates. This specialized nostril is an adaptation that enhances their sense of smell by increasing the surface area within to detect scent. They also have enlarged brain structures that help them process those scents. Learn more at the Cornell and U.S.G.S. websites.

Katie Turner, July 25, 2008

NOAA Teacher at Sea
Katie Turner
Onboard NOAA Ship Miller Freeman
July 10 – 31, 2008

Mission: Pollock Survey
Geographical Area: Eastern Bering Sea
Date: July 25, 2008

Bald eagles are abundant around the port in Dutch Harbor
Bald eagles are abundant around the port in Dutch Harbor

Weather Data from the Bridge 
Visibility: 10 nautical miles
Wind Direction: 075
Wind Speed: 13 knots
Sea Wave Height: 1-2 feet
Swell Wave Height: 3 feet
Seawater Temperature: 7.1˚C.
Present Weather Conditions: Cloudy, 9.3˚C, 94% humidity

Science and Technology Log 

After spending 3 weeks at the dock in Dutch Harbor, MILLER FREEMAN finally began the cruise with less than a week left to complete the study. We pulled away from the dock Thursday afternoon, 24 July, and sailed to nearby Captain’s Bay to calibrate the acoustic instruments.

A line diagram of MILLER FREEMAN showing the location of the centerboard below the hull
A line diagram of MILLER FREEMAN showing the location of the centerboard below the hull

Background 

Acoustics is the scientific study of sound: its generation, transmission, and reception.  Sound travels in waves at known rates, and the physical properties of the material the waves travel through affect the speed of sound.  These properties of sound waves enable their use in medical diagnosis, testing critical materials, finding oil-bearing rocks underground, and counting fish in the ocean. Sound travels through seawater of average salinity about 5 times faster than through air (~1,500 m/s, or about 15 football fields in one second).  Many animals that live in the ocean rely on sound more than vision for communication and survival. You are probably already familiar with echolocation and communication vocalizations in whales and porpoises.

Picture of the transducers in the centerboard, which is lowered when the ship is at sea. Lowering the transducer away from the hull reduces the noise interference of bubbles running along the hull while underway.
Picture of the transducers in the centerboard, which is lowered when the ship is at sea. Lowering the transducer away from the hull reduces the noise interference of bubbles running along the hull while underway.

The speed of sound in water increases as temperature and salinity increase.  It also increases with depth due to the increase in pressure.  Therefore, in order to know the speed of sound at a given location in the sea, you need to know the temperature, salinity, and depth. There are other factors that are important to consider as well.  As sound travels through seawater it loses energy because of spreading, scattering and absorption.  When sound waves strike bubbles, particles suspended in the water column, organisms, the seafloor, and even the surface, some of the energy bounces off or is scattered. When the sound energy is scattered at angles greater than 90 degrees it is referred to as backscatter.

Fish Assessment 

Scientists use acoustics to measure fish abundance in the ocean by emitting sound waves at specific frequencies and then measuring the amount of backscatter.  Different organisms and other objects will have a characteristic backscatter that is dependent on many biological factors as well as the physical properties of the medium. The most important biological factor is presence and the size of a swim bladder, but also the organism’s size, shape and orientation.  If scientists know the backscatter signature of the target species (which can be determined experimentally or by mathematical models), they can use sound to identify and measure certain fish populations in the ocean. Onboard the ship, sound waves are emitted from an instrument called a transducer, which is located in the centerboard of the ship. The transducer generates sounds directly beneath the ship into the water column below (pings).  When these sound waves are backscattered from the fish below back to the transducer, they are converted to an electrical signal that is sent to the scientist’s computer.  There, a profile can be created that represents the fish in a graphical image.

Chief Scientist, Patrick Ressler, attaches calibration spheres to the line that will be lowered beneath the ship.
Chief Scientist, Patrick Ressler, attaches calibration spheres to the line that will be lowered beneath the ship.

Before making any actual measurements during this study, it is necessary to calibrate the acoustic instruments on board the ship. Calibrations of instruments and other measuring devices are done by using a known standard to compare the output of the instrument. So for example, if I wanted to calibrate a stick as a measuring device, first I would compare its length to a known standard such as a ruler. We anchored in Captain’s bay, on both bow and stern to keep the ship from moving much, and spheres with known acoustic properties were suspended beneath the ship at a known distance below the transducers. Acoustic data were then collected on backscatter from the spheres. Knowing the distance to the spheres, their acoustic qualities (how they will backscatter the sound), and the physical qualities of the medium (seawater temperature and salinity) allowed the scientists to standardize their equipment.   While acoustic calibrations were performed by the scientists, the survey technicians collected seawater temperature and salinity. The way these properties are measured is standard practice on research vessels.  An instrument package called a “CTD” measures conductivity (which is converted to salinity), temperature, and depth.  Sensors for each of these make up the package, and are mounted on a metal frame called a rosette. The rosette is lowered into the water column by a crane, and the data collected is transmitted via a cable to a computer on board. Once the calibration and CTD measurements were completed, we pulled anchor and headed northwest into the Bering Sea to meet up with NOAA Ship OSCAR DYSON.  We expect to reach our rendezvous point by late Friday to begin our study.

Survey Technician Tayler Wilkins monitors the CTD data transmission while communicating with the crane operator as the rosette is lowered through the water column. The computer automatically produces a profile of temperature and salinity with depth.
Survey Technician Tayler Wilkins monitors the CTD data transmission while communicating with the crane operator as the rosette is lowered through the water column. The computer automatically produces a profile of temperature and salinity with depth.

Personal Log 

The long stay in Dutch Harbor made the departure that much more exciting.  I am looking forward to what little time is left.  The crew of MILLER FREEMAN have all made me feel welcome, and have been helpful in answering my questions and educating me on shipboard operations.

New Terms 

acoustics, calibration, backscatter, centerboard, transducer, CTD rosette

Learn more here